The main aim of this study is to use petroleum systems analysis to improve the understanding of the petroleum systems present on the Lawn Hill Platform of the Isa Superbasin. Part A of this report series reported the results of burial and thermal modelling of two wells (Desert Creek 1 and Egilabria 1). Results from the 1-D modelling help other aspects of interest such as the hydrocarbon generation potential and distribution of hydrocarbons by source rock which this publication presents. Modelling uncertainties are reported and described, highlighting knowledge gaps and areas for further work.

<div>Lateral variation in maturity of potential Devonian source rocks in the Adavale Basin has been investigated using nine 1D burial, thermal and petroleum generation history models, constructed using existing open file data. These models provide an estimate of the hydrocarbon generation potential of the basin. Total organic carbon (TOC) content and pyrolysis data indicate that the Log Creek Formation, Bury Limestone and shale units of the Buckabie Formation have the most potential as source rocks. The Log Creek Formation and the Bury Limestone are the most likely targets for unconventional gas exploration.</div><div>The models were constructed using geological information from well completion reports to assign formation tops and stratigraphic ages, and then forward model the evolution of geophysical parameters. The rock parameters, including facies, temperature, organic geochemistry and petrology, were used to investigate source rock quality, maturity and kerogen type. Suitable boundary conditions were assigned for paleo-heat flow, paleo-surface temperature and paleo-water depth. The resulting models were calibrated using bottom hole temperature and measured vitrinite reflectance data.</div><div>The results correspond well with published heat flow predictions, although a few wells show possible localised heat effects that differ from the basin average. The models indicate that three major burial events contribute to the maturation of the Devonian source rocks, the first occurring from the Late Devonian to early Carboniferous during maximum deposition of the Adavale Basin, the second in the Late Triassic during maximum deposition of the Galilee Basin, and the third in the Late Cretaceous during maximum deposition of the Eromanga Basin. Generation in the southeastern area appears to have not been effected by the second and third burial events, with hydrocarbon generation only modelled during the Late Devonian to early Carboniferous event. This suggests that Galilee Basin deposition was not significant or was absent in this area. Any potential hydrocarbon accumulations could be trapped in Devonian sandstone, limestone and mudstone units, as well as overlying younger sediments of the Mesozoic Eromanga Basin. Migration of the expelled hydrocarbons may be restricted by overlying regional seals, such as the Wallumbilla Formation of the Eromanga Basin. Unconventional hydrocarbons are a likely target for exploration in the Adavale Basin, with potential for tight or shale gas from the Log Creek Formation and Bury Limestone in favourable areas.</div>

<div>NDI Carrara 1 is a 1750 m stratigraphic drill hole completed in 2020 as part of the MinEx CRC National Drilling Initiative (NDI) in collaboration with Geoscience Australia under the Exploring for the Future program and the Northern Territory Geological Survey. It is the first stratigraphic test of the Carrara Sub-basin, a recently discovered depocentre in the South Nicholson region. The drill hole intersected Cambrian and Proterozoic sediments consisting of organic-rich black shales and a thick sequence of interbedded black shales and silty sandstones with hydrocarbon shows. A comprehensive analytical program carried out by Geoscience Australia on the recovered core samples from 283 m to total depth at 1751&nbsp;m provides critical data for calibration of burial and thermal history modelling.</div><div>Using data from this drilling campaign, burial and thermal history modelling was undertaken to provide an estimate of the time-temperature maxima that the sub-basin has experienced, contributing to an understanding of hydrocarbon maturity. Proxy kerogen kinetics are assessed to estimate the petroleum prospectivity of the sub-basin and attempt to understand the timing and nature of hydrocarbon generation. Combined, these newly modelled data provide insights into the resource potential of this frontier Proterozoic hydrocarbon province, delivering foundational data to support explorers across the eastern Northern Territory and northwest Queensland.</div> <b>Citation:</b> Palu Tehani J., Grosjean Emmanuelle, Wang Liuqi, Boreham Christopher J., Bailey Adam H. E. (2023) Thermal history of the Carrara Sub-basin: insights from modelling of the NDI Carrara 1 drill hole. <i>The APPEA Journal</i><b> 63</b>, S263-S268. https://doi.org/10.1071/AJ22048

The Browse Basin hosts considerable gas and condensate resources, including the Ichthys and Prelude fields that are being developed for liquefied natural gas (LNG) production. Oil discoveries are sub-economic. This multi-disciplinary study integrating sequence stratigraphy, palaeogeography and geochemical data has mapped the spatial and temporal distribution of Jurassic to earliest Cretaceous source rocks. This study allows a better understanding of the source rocks contribution to the known hydrocarbon accumulations and charge history in the basin, including in underexplored areas. The Jurassic to earliest Cretaceous source rocks have been identified as being the primary sources of the gases and condensates recovered from accumulations in the Browse Basin as follows: - The Lower–Middle Jurassic J10–J20 (Plover Formation) organic-rich source rocks have been deposited along the northeast-southwest trending fluvial-deltaic system associated with a phase of pre-breakup extension. They have charged gas reservoired within J10–J20 accumulations on the Scott Reef Trend and in the central Caswell Sub-basin at Ichthys/Prelude, and in the Lower Cretaceous K40 supersequence on the Yampi Shelf. - Late Jurassic–earliest Cretaceous J30–K10 source rocks are interpreted to have been deposited in a rift, north of the Scott Reef Trend and along the Heywood Fault System (e.g. Callovian–Tithonian J30–J50 supersequences, lower Vulcan Formation). The J30–K10 shales are believed to have sourced wet gas reservoired in the K10 sandstone (Brewster Member) in the Ichthys/Prelude and Burnside accumulations, and potentially similar plays in the southern Caswell Sub-basin. - The organic-rich source rocks observed in the Heywood Graben may be associated with deeper water marine shales with higher plant input into the isolated inboard rift. They are the potential source of fluids reservoired within the Crux accumulation, which has a geochemical composition more closely resembling a petroleum system in the southern Bonaparte Basin.

Although the Canning Basin has yielded minor gas and oil within conventional and unconventional reservoirs, the relatively limited geological data available in this under-explored basin hinder a thorough assessment of its hydrocarbon potential. Knowledge of the Paleozoic Larapintine Petroleum Supersystem is restricted by the scarcity of samples, especially recovered natural gases, which are limited to those collected from recent exploration successes in Ordovician and Permo-Carboniferous successions along the margins of the Fitzroy Trough and Broome Platform. To address this shortcoming, gases trapped within fluid inclusions were analysed from 121 Ordovician to Permian rock samples (encompassing cores, sidewall cores and cuttings) from 70 exploration wells with elevated mud gas readings. The molecular and carbon isotopic compositions of these gases have been integrated with gas compositions derived from open-file sources and recovered gases analysed by Geoscience Australia. Fluid inclusion C1–C5 hydrocarbon gases record a snapshot of the hydrocarbon generation history. Where fluid inclusion gases and recovered gases show similar carbon isotopes, a simple filling history is likely; where they differ, a multicharge history is evident. Since some fluid inclusion gases fall outside the carbon isotopic range of recovered gases, previously unidentified gas systems may have operated in the Canning Basin. Interestingly, the carbon isotopes of the fluid-inclusion heavy wet gases converge with the carbon isotopes of the light oil liquids, indicating potential for gas–oil correlation. A regional geochemical database incorporating these analyses underpins our re-evaluation of gas systems and gas–gas correlations across the basin. <b>Citation:</b> Boreham, C.J., Edwards, D.S., Sohn, J.H., Palatty, P., Chen, J.H. and Mory, A.J., 2020. Gas systems in the onshore Canning Basin as revealed by gas trapped in fluid inclusions. In: Czarnota, K., Roach, I., Abbott, S., Haynes, M., Kositcin, N., Ray, A. and Slatter, E. (eds.) Exploring for the Future: Extended Abstracts, Geoscience Australia, Canberra, 1–4.

<div>Geoscience Australia’s Onshore Basin Inventories project delivers a single point of reference and creates a standardised national basin inventory that provides a whole-of-basin catalogue of geology, petroleum systems, exploration status and data coverage of hydrocarbon-prone onshore Australian sedimentary basins. In addition to summarising the current state of knowledge within each basin, the onshore basin inventory reports identify critical science questions and key exploration uncertainties that may help inform future work program planning and decision making for both government and industry. Volume 1 of the inventory covers the McArthur, South Nicholson, Georgina, Wiso, Amadeus, Warburton, Cooper and Galilee basins and Volume 2 expands this list to include the Officer, Perth and onshore Canning basins. Under Geoscience Australia’s Exploring for the Future (EFTF) program, several new onshore basin inventory reports are being delivered. Upcoming releases include the Adavale Basin of southern Queensland, and a compilation report addressing Australia’s poorly understood Mesoproterozoic basins. These are supported by value-add products that address identified data gaps and evolve regional understanding of basin evolution and prospectivity, including petroleum systems modelling, seismic reprocessing and regional geochemical studies. The Onshore Basin Inventories project continues to provide scientific and strategic direction for pre-competitive data acquisition under the EFTF work program, guiding program planning and shaping post-acquisition analysis programs.</div>

The Browse Basin, located offshore on Australia¿s North West Shelf, is a proven hydrocarbon province that hosts large gas accumulations with associated condensate. Small light oil accumulations are found mostly within the Cretaceous succession. Geoscience Australia undertook a multi-disciplinary study of the Browse Basin to better understand the regional hydrocarbon prospectivity and high-grade areas with increased liquids potential in Cretaceous supersequences. The sequence stratigraphy and structural framework of the Cretaceous succession were analysed to determine the spatial relationship of reservoir and seal pairs, and areas of source rock development. Updated biostratigraphy, well lithology and log analysis, seismic stratal geometry, facies, palaeogeographic and play fairway interpretations were completed for seven supersequences from the late Tithonian to Maastrichtian (K10¿K60 supersequences). These data, together with geochemical studies of source rocks and fluids (gases and liquids), were integrated in a regional petroleum systems model to better understand source rock distribution, character, generation potential, and play prospectivity. The regional deposition of the Permo-Carboniferous, Triassic, Jurassic and Cenozoic successions were mapped to constrain the burial history model. Supersequence cross-sections and palaeogeographic maps show the distribution of gross depositional facies, revealing three main Cretaceous stratigraphic play types across the basin. These are basin-margin, clinoform topset and submarine fan plays. Geochemical analyses using molecular and stable carbon and hydrogen isotopic signatures correlate fluids in these plays with potential source rocks. The geochemical fingerprints enabled the identification of four Mesozoic petroleum systems. Burial history modelling demonstrates hydrocarbon generation from potential source rocks within the Jurassic and Lower Cretaceous supersequences. Many accumulations have a complex charge history with the mixing of hydrocarbon fluids from multiple Mesozoic source rocks, as recognised from the deconvolution of their geochemical compositions. The basin margin play occurs within the K10¿K40 supersequences (Early Cretaceous upper Vulcan and Echuca Shoals formations) along the inboard Yampi and Leveque shelves. The K20¿K30 (Echuca Shoals Formation) basin margin play received gas (Caspar 1A) potentially sourced from the J10¿J20 supersequences (Plover Formation) and oil (Gwydion 1) sourced from the K20¿K30 supersequences (Echuca Shoals Formation). Seal quality and thickness are good except where the seal facies pinch out around basement highs on the Yampi Shelf, and where they are truncated by the K50 sequence boundary (Wangarlu Formation) inboard on the Leveque Shelf. The K40 basin margin play (Jamieson Formation) received gas (Gwydion 1, Cornea field) that is most likely sourced from the J10¿J20 supersequences (Plover Formation) and oil (Cornea field) sourced from the K20¿K30 supersequences (Echuca Shoals Formation). The marine shales in the K20¿K30 supersequences (Echuca Shoals Formation) have low hydrogen indices (~200 mg hydrocarbons/gTOC) and hence may only be able to expel sufficient hydrocarbons to sustain migration over short distances. The co-existence of oil sourced from these successions and gas sourced from the J10¿J20 supersequences (Plover Formation) suggests that potential Cretaceous-sourced liquids were mobilised and carried to the shelf edge by co-migrating Early¿Middle Jurassic Plover-derived gas. Once present within these shallow reservoirs, further loss of the low and mid-chain hydrocarbons occurred through leakage, water washing and biodegradation. Together, the migration and secondary alteration processes have enhanced the liquids potential on the basin margin. The clinoform topset play extends between the basin-margin and the shelf-edge. These plays consist of higher order progradational sandstone units overlain by intraformational and top seals. The K10 clinoform topset play (namely the Brewster Member of the Upper Vulcan Formation) hosts gas in the Ichthys/Prelude and Burnside accumulations. The gas is probably largely sourced from the organic-rich shales of the J30¿K10 supersequences (Vulcan Formation), with an additional contribution from the J10¿J20 supersequences (Plover Formation) in satellite fields, such as observed at Concerto 1 ST1. Other similar K10 plays are mapped in the southern Caswell and Oobagooma sub-basins and could receive charge from J30¿K10 potential source pods. The K30 clinoform topset play (M. australis sand of the Echuca Shoals Formation) is a reservoir for gas on the Leveque Shelf at Psepotus 1, with additional evidence for oil migration into this play at Braveheart 1 in the northern Caswell Sub-basin. This play extends in underexplored areas on the Leveque Shelf to the inboard Barcoo Sub-basin and on the southern Yampi Shelf to the outboard Caswell Sub-basin. The K40 clinoform topset play (D. davidii sand of the Jamieson Formation) hosts gas (Adele 1) and light oil (Caswell 1). The light oil is probably sourced primarily from the K20¿K30 supersequences (Echuca Shoals Formation) in the central Caswell Sub-basin. This play extends outboard in the Caswell Sub-basin to Caswell 2 ST2 and Phrixus 1. The submarine fan play comprises sandstone-prone basin floor fans that extend across the basin floor from the toe of the slope and are sealed by down-lapping mudstone facies. This play may overlie either second, third, fourth or fifth-order sequence boundaries and are particularly well developed within the Upper Cretaceous K60 supersequence (Wangarlu Formation). The K30 submarine fan play (Echuca Shoals Formation) hosts gas in the outboard northern Caswell Sub-basin (Abalone Deep 1 and Adele 1). Isotopic evidence for the gas at Adele 1 suggests that the K20¿K30 supersequences (Echuca Shoals Formation) is the most likely source. This play is underexplored elsewhere within the basin, but it includes the tentatively interpreted play around Omar 1 in the Barcoo Sub-basin. There is evidence for oil migration through the K50 (Wangarlu Formation) submarine fan play at Discorbis 1, with the source of hydrocarbons possibly being from the K20¿K30 supersequences (Echuca Shoals Formation). This play extends into the inboard northern Caswell Sub-basin. The K60 submarine fan (Wangarlu Formation) play either hosts oil and gas (Abalone 1, Caswell 2 and Marabou 1) or contains evidence of hydrocarbon migration (Discorbis 1 and Gryphaea 1) in numerous wells. The most likely source of petroleum is from the K20¿K30 supersequences (Echuca Shoals Formation). The results of this study reveal the existence of multiple stacked Cretaceous plays in the basin, including those in underexplored vacant acreage. Presented at the 2017 Southeast Asia Petroleum Exploration Society (SEAPEX) Conference

<p>Northern Australia contains extensive Proterozoic-aged sedimentary basins with potential energy, mineral, and groundwater resources concealed beneath the surface. The region is remote and largely underexplored with limited data and infrastructure and therefore is considered to have high exploration risk. Exploration for hydrocarbons and basin-hosted base metals, although perceived to have very different exploration models, share a number of important similarities and key parameters. Foremost amongst these is shale geochemistry since the same reduced, organic-rich shales are both a hydrocarbon source rock and a depositional site for base metal mineralisation. Furthermore, anoxic and euxinic (anoxic with free hydrogen sulfide, H2S) water column and sediments are important for both the preservation of organic matter and as a H2S reservoir needed for precipitation of ore minerals after reaction with oxic metalliferous brines. Here we present new organic and inorganic geochemical datasets for shales in the South Nicholson Basin, Lawn Hill Platform and greater McArthur Basin, including the organic-richness of shales and the inorganic geochemistry of redox-sensitive trace metals, to demonstrate changes in water-column chemistry and favourable base metals depositional sites. Parameters such as total organic carbon (TOC) content and redox-sensitive elemental concentrations are used to identify prospective packages with hydrocarbon and base metals mineral resource potential <p>The results reveal many units in the Lawn Hill Platform, South Nicholson Basin and greater McArthur Basin contain organic-rich rocks. A cut-off value of TOC ≥ 2 wt% is used to define several shale and carbonate sequences in the region that are favourable for both hydrocarbon generation and as base metals depositional sites. Inorganic geochemistry results demonstrate a range of paleoredox conditions, from predominantly anoxic, ferruginous conditions with deviations, to sub-oxic and euxinic conditions. Future work mapping the temporal and spatial distribution of this geochemistry, in combination with other mappable geological criteria, is required to create mineral and petroleum systems models that can define prospective fairways across the basins and increase our understanding of resource potential. <p>The precompetitive data generated in this study highlight the utility of shared geochemical datasets for resource exploration in the region. More broadly, this study improves our understanding of the energy and mineral potential across northern Australia, supporting resource decision-making and investment.

The Browse Basin is located offshore on Australia's North West Shelf and is a proven hydrocarbon province hosting gas with associated condensate and where oil reserves are typically small. The assessment of a basin's oil potential traditionally focuses on the presence or absence of oil-prone source rocks. However, light oil can be found in basins where source rocks are gas-prone and the primary hydrocarbon type is gas-condensate. Oil rims form whenever such fluids migrate into reservoirs at pressures less than their dew point (saturation) pressure. By combining petroleum systems analysis with geochemical studies of source rocks and fluids (gases and liquids), four Mesozoic petroleum systems have been identified in the basin. This study applies petroleum systems analysis to understand the source of fluids and their phase behaviour in the Browse Basin. Source rock richness, thickness and quality are mapped from well control. Petroleum systems modelling that integrates source rock property maps, basin-specific kinetics, 1D burial history models and regional 3D surfaces, provides new insights into source rock maturity, generation and expelled fluid composition. The principal source rocks are Early-Middle Jurassic fluvio-deltaic coaly shales and shales within the J10-J20 supersequences (Plover Formation), Middle-Late Jurassic to Early Cretaceous sub-oxic marine shales within the J30-K10 supersequences (Vulcan and Montara formations) and K20-K30 supersequences (Echuca Shoals Formation). All of these source rocks contain significant contributions of land-plant derived organic matter and within the Caswell Sub-basin have reached sufficient maturities to have transformed most of the kerogen into hydrocarbons, with the majority of expulsion occurring from the Late Cretaceous until present.

<div>Lateral variation in maturity of potential Devonian source rocks in the Adavale Basin have been investigated using nine 1D burial thermal and petroleum generation history models, constructed using existing open file data. These models provide an estimate of the hydrocarbon generation potential of the basin. Total organic carbon (TOC) content and pyrolysis data indicate that the Log Creek Formation, Bury Limestone and shale units of the Buckabie Formation have the most potential as source rocks. The Log Creek Formation and the Bury Limestone are the most likely targets for unconventional gas exploration.</div><div>&nbsp;</div><div>The models were constructed used geological information from well completion reports to assign formation tops and stratigraphic ages to then forward-model the evolution of geophysical parameters. The rock parameters, including facies, temperature, organic geochemistry/petrology, were used to investigate source rock quality, maturity and kerogen type. Suitable boundary conditions were assigned for paleo-heat flow, paleo-surface temperature and paleo-water depth. The resulting models were calibrated using bottom hole temperature and measured vitrinite reflectance data.</div><div>&nbsp;</div><div>The results correspond relatively well with published heat flow predictions, however a few wells show possible localised heat effects that differ from the overall basin average. The models indicate full maturation of the Devonian source rocks with generation occurring during the Carboniferous and again during the Late Cretaceous. Any potential accumulations may be trapped in Devonian sandstone, limestone and mudstone units, as well as overlying younger sediments of the Mesozoic Eromanga Basin. Accumulations could be trapped by localised deposits of the Cooladdi Dolomite and other marine, terrestrial clastic and evaporite units around the basin. Migration of the expelled hydrocarbons may be restricted by overlying regional seals, such as the Wallumbilla Formation of the Eromanga Basin. Unconventional hydrocarbons are a likely target for the Adavale Basin with potential either for tight or shale gas in favourable areas from the Log Creek Formation and Bury Limestone.</div> This Abstract was submitted/presented to the 2023 Australian Exploration Geoscience Conference 13-18 Mar (https://2023.aegc.com.au/)